Veuillez passer au nouveau navigateur Edge, ou utiliser Chrome, Firefox ou Safari, avant de continuer. Le site d'ADI Global Distribution ne prendra pas en charge Internet Explorer après le 12 mars 2021.
Numéro d'article ADI #:NV-214A-M Modèle #: NV-214A-M Nom: NVT Phybridge NV-214A-M Single Channel Passive Video Transceiver
Présentation du produit
Général Informations
The NVT Model NV-214A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
This product is an improvement over NVT's popular NV-213A video transceiver. The passive NV-214A-M has a 9" mini-coax pigtail lead which allows in-camera enclosure mounting in most dome cameras and a greater number of mounting options in general at both ends of the system. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT's passive products for applications under 750ft. The NV-214A-M Video Transceiver also incorporates new improved transient protection that eliminates the need for a ground screw.
The unparalleled interference rejection and low emissions of the NV-214A-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. As with all NVT products, the NV-214A-M carries a limited lifetime warranty and is UL and cUL listed. Main Features
Full-motion CCTV video at distances up to 750ft (225m) when used with any passive NVT transceiver or hub
Up to 3,000ft (1km) with an NVT active receiver or hub
Supports "up-the-coax" type control signal up to 750ft (225m)
Mini-coax pigtail supports in-camera mounting in most dome cameras
No power required
Exceptional interference rejection
Built-in transient protection
Male BNC on the NV-214A-M allows connection directly to the camera/DVR
Limited lifetime warranty
Main Features
Full-motion CCTV video at distances up to 750ft (225m) when used with any passive NVT transceiver or hub
Up to 3,000ft (1km) with an NVT active receiver or hub
Supports "up-the-coax" type control signal up to 750ft (225m)
Informatie
Categorie : Communications de données et réseaux, Convertisseurs de média, Convertisseurs de médias et émetteurs-récepteurs, Produits
Spécifications
Caractéristiques générales
ADI Référence du produit
NV-214A-M
Code fabricant
NV-214A-M
Fabricant
Network Video Technologies
Marque
NVT Phybridge
Modèle de produit
NV-214A-M
Nom de produit
Single Channel Video Passive Transceiver with Coax Pigtail
